HDPE Cap & Closure Grade Granules

HDPE Cap & Closure Grade Granules are polyethylene materials formulated for the manufacture of caps, closures and sealing components used on bottles, containers and industrial packaging. These applications require a controlled balance between stiffness, flexibility, dimensional accuracy and resistance to stress cracking. The resin must also provide consistent filling behavior in high-speed injection molding or compression molding operations, depending on the closure design. Melt flow characteristics are carefully selected to support short molding cycles while maintaining the mechanical strength required for threading, snap fitting and repeated opening and closing. A stable formulation helps manufacturers achieve uniform wall thickness, reliable dimensions and consistent sealing performance across large production volumes.

Common applications include beverage and water bottle caps, detergent closures, chemical container caps, household packaging closures and industrial bottle components. HDPE is suitable for these products because it combines low moisture absorption with good chemical resistance and sufficient toughness for repeated handling. Closure manufacturers pay particular attention to stress crack resistance because caps may be exposed to internal pressure, chemical contents and mechanical stresses around threads and hinges. Depending on the design, the grade may be selected to optimize cycle time, stiffness, torque performance, impact resistance and dimensional stability. Proper material selection can also reduce molding defects and improve consistency in automated packaging lines.

HDPE Cap & Closure Grade is normally supplied as clean polymer granules in sealed 25 kg industrial bags or larger packaging formats for high-volume molding operations. The bags should provide effective protection against dust, moisture and foreign particles because contamination can negatively affect high-speed molding processes and closure appearance. For commercial purchasing, manufacturers should compare MFR, density, stiffness, impact resistance and environmental stress crack resistance with the requirements of the specific closure design. Batch-to-batch consistency is particularly important for producers operating automated molding and packaging systems at high production speeds.

HDPE Cap & Closure Grade Granules – Technical Specifications

Technical Property	Typical Specification / Description
Polymer Type	High-Density Polyethylene (HDPE)
Application	Caps, closures, lids and sealing components
Melt Flow Rate (MFR)	Typically 1.0–10.0 g/10 min, depending on grade
Density	Typically 0.940–0.970 g/cm³
Processing Method	Injection Molding / Compression Molding
Tensile Strength	Typically 20–35 MPa
Flexural Modulus	Typically 800–1,500 MPa
Impact Resistance	Good to Excellent, depending on grade
Environmental Stress Crack Resistance	Good to Excellent
Appearance	Natural translucent to milky-white pellets; other colors available

Note: Technical values may vary depending on the specific HDPE grade.

IF YOU ARE WILLING TO BUY HDPE GRANULE FROM IRANIAN SUPPLIERS, PLEASE SCROLL DOWN AND SUBMIT YOUR REQUEST.

Rated 0 out of 5

0 reviews

Rated 5 out of 5

0

Rated 4 out of 5

0

Rated 3 out of 5

0

Rated 2 out of 5

0

Rated 1 out of 5

0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “HDPE Cap & Closure Grade Granules”

You must be logged in to post a review.

FAQ HDPE Cap & Closure Grade Granules

HDPE Cap & Closure Grade is primarily used to manufacture bottle caps, container closures, lids, screw caps, snap-fit closures and other sealing components. It is widely used in beverage, food, household chemical, detergent, personal care and industrial packaging applications.

HDPE offers a useful combination of stiffness, impact resistance, chemical resistance, low moisture absorption and environmental stress crack resistance. These properties help caps maintain their dimensions and sealing performance during filling, transportation, storage and repeated handling.

HDPE Cap & Closure Grade can be processed mainly through high-speed injection molding and compression molding, depending on the closure design and production equipment. The appropriate MFR should be selected according to the molding process, cycle time, cavity design and required mechanical properties.

The selection should consider MFR, density, stiffness, impact strength, ESCR, shrinkage, molding cycle and the final closure design. The required torque, thread geometry, sealing system and compatibility with the packaged product are also important factors. For commercial purchases, reviewing the manufacturer's TDS and COA is recommended before approving a grade for production.

Yes, certain HDPE grades are specifically manufactured for food-contact and beverage packaging applications. However, food-contact suitability must be confirmed for the specific grade and destination market through the manufacturer's regulatory documentation and relevant compliance certificates. Not every HDPE grade is automatically suitable for direct food contact.

International buyers can work with IranCorps to identify and source reliable Iranian suppliers of HDPE Cap & Closure Grade Granules. IranCorps can help buyers compare available grades, obtain technical documents such as TDS and COA, communicate with qualified suppliers, check commercial specifications and arrange sourcing based on the required quantity, application and destination market.