Aluminum Alloy 1050

Aluminum Alloy 1050 is a commercially pure aluminum grade from the 1xxx series with a minimum aluminum content of approximately 99.5%. This alloy is widely used in industries where high electrical conductivity, excellent corrosion resistance, superior formability, and good surface finishing are required. Due to its high purity and low alloying element content, Aluminum 1050 offers outstanding chemical stability and is considered one of the most versatile pure aluminum materials for industrial applications.

Aluminum Alloy 1050 is available in different commercial forms including sheets, plates, coils, strips, foils, profiles, wires, tubes, and extruded products. This material is mainly supplied in tempers such as O (annealed), H12, H14, H16, and H18, depending on the required hardness and mechanical performance. Although it has lower mechanical strength compared with heat-treatable aluminum alloys, it provides excellent ductility, weldability, thermal conductivity, and electrical performance.

This alloy is widely used in electrical components, heat exchangers, chemical equipment, food processing equipment, pharmaceutical containers, reflectors, cable sheathing, architectural applications, and general sheet metal manufacturing. Aluminum 1050 is also preferred for applications requiring easy forming, deep drawing, corrosion resistance, and a bright reflective surface finish. It can be supplied according to international standards such as EN AW-1050A, ASTM, and UNS A91050 for global B2B industrial requirements

Aluminum Alloy 1050 Technical Specifications

Specification	Value
Alloy Grade	Aluminum Alloy 1050 / EN AW-1050A
Aluminum Content	Min. 99.5%
Alloy Series	1000 Series (Pure Aluminum)
Main Alloying Elements	Very Low Si, Fe, Cu, Mg, Mn, Zn
Density	2.71 g/cm³
Temper Conditions	O, H12, H14, H16, H18
Tensile Strength	Approx. 60–145 MPa (Depending on Temper)
Yield Strength	Approx. 20–85 MPa
Electrical Conductivity	High (Approx. 59% IACS)
Thermal Conductivity	Approx. 222 W/m·K
Melting Point	Approx. 650°C
Corrosion Resistance	Excellent

IF YOU ARE WILLING TO BUY ALUMINUM ALLOY 1050 FROM IRANIAN SUPPLIERS, PLEASE SCROLL DOWN AND SUBMIT YOUR REQUEST.

Rated 0 out of 5

0 reviews

Rated 5 out of 5

0

Rated 4 out of 5

0

Rated 3 out of 5

0

Rated 2 out of 5

0

Rated 1 out of 5

0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “Aluminum Alloy 1050”

You must be logged in to post a review.

FAQ Aluminum Alloy 1050

Aluminum Alloy 1050 is a high-purity aluminum alloy containing at least 99.5% aluminum. It belongs to the 1000 series and is known for excellent corrosion resistance, conductivity, and formability.

Aluminum 1050 is used in electrical conductors, heat exchangers, chemical processing equipment, food industry equipment, aluminum foil production, reflectors, containers, and general fabrication industries.

Aluminum 1050 can be supplied as sheets, plates, coils, strips, foils, tubes, profiles, bars, and wires according to customer requirements.

Yes. Aluminum Alloy 1050 has excellent weldability and formability, making it suitable for bending, deep drawing, rolling, and fabrication processes.

Unlike alloys such as 5052 or 6061, Aluminum 1050 has much higher purity and electrical conductivity but lower mechanical strength because it contains minimal alloying elements.

Yes. IRANCORPS can assist international buyers in sourcing Aluminum Alloy 1050 from reliable Iranian manufacturers and suppliers with suitable specifications, documentation, and export support.