Cyanoacrylate Adhesives

Cyanoacrylates are a family of strong fast-acting adhesives derived from ethyl cyanoacrylate and related esters. The cyanoacrylate group in the monomer rapidly polymerizes in the presence of moisture, which reacts instantly on exposure to air, even just a small amount of relative humidity in the atmosphere, to form long, strong chains.

cure time of cyanoacrylate is From 5 up to 90 seconds for a fixture, and from 8 to 24 hours for full curing. The cure time will depend on the surfaces engaged and primarily their moisture absorption qualities, as well as the type of cyanoacrylate used. To increase the curing speed Cyanoacrylate accelerators can be used they are setting compounds designed to increase the cure speed of cyanoacrylate adhesives. Generally, they contain solvents—either acetone, heptane, or ethyl alcohol—which act as a carrier for the active setting ingredient (amine) and evaporate rapidly without leaving significant amounts of residue on the bonding material.

Specific cyanoacrylates include methyl 2-cyanoacrylate (MCA), ethyl 2-cyanoacrylate (ECA, commonly known as Super Glue, Krazy Glue, as instant glues, power glues or superglues n-butyl cyanoacrylate (n-BCA), octyl cyanoacrylate, and 2-octyl cyanoacrylate . Uses can be in Medical and veterinary , Forensics ,Cosmetics, Niche and hobbies , Arrow glues, Fencing and Woodworking. Cyanoacrylate adhesives can bond almost instantly to a variety of surfaces, including metal, plastic, and glass. Because they adhere strongly to skin, they are also employed by surgeons for closing incisions .

Technical Property	Typical Specification
Adhesive Type	One-Component Cyanoacrylate
Base Chemistry	Ethyl / Methyl Cyanoacrylate
Appearance	Clear to Transparent Liquid
Viscosity	Approx. 2–2,500 cP
Curing Mechanism	Moisture-Activated
Fixture Time	Approx. 3–30 seconds
Full Cure	Typically 24 hours
Gap Filling	Approx. 0.05–0.20 mm
Shear Strength	Approx. 18–30 MPa
Temperature Resistance	Approx. -54 to +121°C
Main Substrates	Plastics, Metals, Rubber, Wood, Ceramics
Main Applications	Assembly, Electronics, Automotive, Appliances, General Repair

Note: Curing time can be adjusted according customer request.

IF YOU ARE WILLING TO BUY CYANOACRYLATE ADHESIVES FROM IRANIAN SUPPLIERS , PLEASE SCROLL DOWN AND SUBMIT YOUR REQUEST.

Rated 0 out of 5

0 reviews

Rated 5 out of 5

0

Rated 4 out of 5

0

Rated 3 out of 5

0

Rated 2 out of 5

0

Rated 1 out of 5

0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “Cyanoacrylate Adhesives”

You must be logged in to post a review.

FAQ Cyanoacrylate Adhesives

Cyanoacrylate adhesives are fast-curing, one-component adhesives that polymerize when exposed to trace amounts of moisture on the bonding surfaces. They are commonly known as instant adhesives or super glues.

They are widely used for bonding plastics, metals, rubber, ceramics, wood and various elastomers. Special grades and primers can improve bonding on difficult-to-bond plastics such as polyolefins.

Depending on the grade, substrate, humidity and bond gap, fixture time can be only a few seconds. Some commercial grades achieve fixture strength in approximately 3–20 seconds.

Low-viscosity grades flow easily into very small gaps and are suitable for capillary bonding. Higher-viscosity grades provide better gap filling and are useful when surfaces are not perfectly close-fitting. Commercial grades range from water-thin liquids to thixotropic gels.

Standard grades have limited long-term resistance to high temperatures, solvents and severe environmental exposure. However, specialized high-temperature formulations can provide substantially improved performance, with some grades designed for temperatures above 120°C.

IRANCORPS can assist international B2B buyers in sourcing Cyanoacrylate Adhesives from Iranian suppliers. Buyers can provide their required viscosity, application, packaging size, substrate and target quantity so the appropriate grade and commercial offer can be identified.